ELECTRICAL ORDER FORM

ELECTRICAL ORDER FORM
COMPANY:
EXHIBITOR SERVICES
701 Convention Plaza, St. Louis, MO 63101
Ph: (314) 342-5324 Fax: (314) 342-5384
[email protected]
E
Advance Payment Deadline Date: 4/9/14
M
BTH #
EVENT:
FIRST Championship 2014
FACILITY:
AMERICA’S CENTER
DATES:
April 23-26, 2014
EVENT# 044026SL
FOR YOUR CONVENIENCE PLACE YOUR ORDER ONLINE AT WWW.EDLEN.COM
ORDER INSTRUCTIONS
ELECTRICAL OUTLETS Approximately 120V/208V A.C. 60 Cycle - Prices are for entire event
120 VOLT POWER DELIVERY
The cost of 120-Volt outlets includes
delivery to one location in island booths
and to one location at the rear of inline or
peninsula booths.
If you require the
outlets to be distributed to any other
location, material and labor charges apply.
There is a minimum charge of 1 hour for
installation & 1/2 for removal. Complete
and return the Electrical Labor Order Form
along with a floor plan layout of your booth
space indicating outlet locations.
208/480V POWER DELIVERY
AND CONNECTIONS
The delivery and connection of high
voltage services is done on a time and
material basis. There is a minimum 1 hour
for installation & 1/2 hour for removal.
Edlen electricians must make all high
voltage connections and disconnects.
Please complete the Electrical Labor Order
Form to schedule your estimated
connection time and return it with this
order.
ISLAND BOOTHS
Include a floor plan layout of your booth
space indicating all outlet locations with
measurements and orientation. If a main
power drop/delivery location is not
indicated on the floor plan, Edlen will
deliver to the most convenient location.
120 VOLT
QTY
QTY
Show
Hours Only
24hrs/day
500 WATTS (5 AMPS)
Double rate
ADVANCE REGULAR
PAYMENT PAYMENT
PRICE
PRICE
72.00
109.00
1000 WATTS (10 AMPS)
103.00
156.00
1500 WATTS (15 AMPS)
127.00
196.00
2000 WATTS (20 AMPS)
156.00
235.00
20 AMPS
236.00
359.00
30 AMPS
297.00
461.00
60 AMPS
459.00
719.00
100 AMPS
656.00
1029.00
20 AMPS
307.00
465.00
30 AMPS
445.00
669.00
60 AMPS
687.00
1029.00
100 AMPS
1098.00
1648.00
200 AMPS
1391.00
2044.00
208 VOLT SINGLE PHASE
208 VOLT THREE PHASE
TRANSFORMER(S) Boost 208 Volt to 230 Volt
Transformer (20 amp minimum charge)
Total Amps: ___________ x 3.00 =
LIGHTING EQUIPMENT (Including current consumed) Include drawing showing lighting location.
ARM LIGHT
89.00
133.00
24 HOUR SERVICES
150 WATT POLE LIGHT
89.00
133.00
Electricity will be turned on within 30
minutes of show opening and off within 30
minutes of show closing, show days only.
If you require power at any other time order
24 hour power at double the outlet rate.
300 WATT POLE LIGHT
104.00
155.00
1000 WATT QUARTZ
632.00
945.00
DEDICATED OUTLETS
For a dedicated outlet order a 20 amp
outlet.
TOTAL
COST
Arm lights require hard wall for installation. Pole lights are installed at rear or side rail of inline booths, other locations require labor & material. Time
and material will apply when lift is required to mount 1000 watt quartz light overhead.
MATERIAL RENTAL (Exhibitor must pick up items at electrical service center on show site)
15’ EXTENSION CORDS
23.00
POWER STRIPS
23.00
MATERIAL DELIVERY
Material requested on this order form must
be picked up by the exhibitor at the Edlen
service desk on show site.
CANCELLATIONS
Credits will not be made for services
delivered and not used. See back of form
for additional details.
TERMS & CONDITIONS
I agree in placing this order that I have
accepted Edlen’s payment policy and the
terms and conditions of contract.
Form 120/208-042012
ELECTRICAL LABOR
ST (Mon-Fri, 8am-4:30pm, excluding holidays)
81.00
OT (Mon-Fri, 4:30pm-8:30pm, Sat)
121.50
DT (Mon-Fri, 8:30pm-6am, Sun & holidays)
162.00
PLACE TOTAL HERE
PRINT NAME:
BOOTH #:
AUTHORIZED SIGNATURE:
EMAIL:
DATE:
The “Method of Payment Form” must be completed and returned with this order form.
TERMS & CONDITIONS
1.
Order with payment & floor plan (for island booths or any booth requiring distribution of electrical services) must be received no later than the
deadline date on the front of this form for advance payment rates to apply. Orders faxed or mailed without payment and required floor plan will
not be guaranteed advance rates. Orders received after the deadline date will be charged at the regular rate. A purchase order or photocopy
of a check are not considered valid forms of payment for securing advanced rate.
2.
In the event order totals are calculated incorrectly, Edlen reserves the right to make the necessary corrections and charge the corrected amount.
Exhibitors will be notified by email or fax of any such corrections.
3.
Outlet rates listed include bringing the services to one location in island booths and to one location at the rear of in-line and peninsula booths.
4.
Outlet rates listed do not include the connection of any equipment, special wiring, or distribution of the outlets to other location’s within the booth
space. Distribution to all other locations regardless of booth type require labor and is performed on a time and material basis. Exhibitors are
invited to contact the local Edlen office to discuss any additional costs that may be incurred.
5.
A separate outlet must be ordered for each location where an electrical service is required. 5 amps or 500 watts is the minimum amount of
power that can be ordered for any one location. Power must be ordered according to peak amperage ratings.
6.
Island booths - If a floor plan showing main power location is not submitted to Edlen prior to our first move-in date, Edlen will deliver the power to
the most convenient location.
7.
Labor rates are based on current wage scales and are subject to change in the event of a wage increase after rates have been published.
A
minimum charge of (1) hour labor will apply for all installation work. The removal of this work will be charged a minimum of 1/2 hour or 1/2 the
total time of installation.
8.
In the event 1000 watt overhead quartz lights cannot be mounted to existing catwalks in the convention hall, lift and labor charges will apply.
Please contact our local office to discuss any additional charges.
9.
Edlen employees are authorized to cut floor coverings when essential for installation of services unless otherwise directed.
10.
Edlen is the exclusive provider of all material and equipment used in the distribution of temporary electrical services throughout the exhibit hall
including the exhibitors booth space. This material is provided on a rental basis ONLY and remains the property of Edlen. It shall be removed
only by Edlen employees.
11.
Any extension cords or power strips ordered on the front of this form should be picked up at the service desk. Credit will not be not issued for
unused items.
12.
Standard wall and other permanent building utility outlets or sockets are not part of a booth space and may not be used by exhibitors unless
electrical services have been ordered through Edlen.
13.
All equipment regardless of source of power, must comply with federal, state and local codes. Edlen reserves the right to inspect all electrical
devices and connections to ensure compliance with all codes, for which labor charges can be incurred. Edlen is required to refuse connections
where the Exhibitor wiring or equipment is not in accordance with electrical codes.
14.
All electrical equipment must be properly tagged and wired with complete information as to the type of current, voltage, phase, cycle,
horsepower, etc., required for operation.
15.
All Exhibitors’ cords must be a minimum of 14 gauge, 3 wire and grounded. Two (2) wire extension cords are not allowed. All exposed, noncurrent carrying metal parts of fixed equipment which are liable to be energized, shall be grounded.
16.
Payment in full must be rendered during the event. Exhibitors ARE NOT billed for services provided. Services may be interrupted if payment is
not received.
17.
Credit will not be given for services installed and not used. All orders are subject to a 25% cancellation fee if cancelled in writing & received by
Edlen within 14 calendar days prior to show opening. Except sales tax, Edlen will not refund overpayment in amounts less than $50.00 unless
specifically requested in writing.
18.
Claims will not be considered or adjustments made unless filed in writing by Exhibitor prior to the close of the event.
19.
Exhibitor holds Edlen harmless for any and all losses of power beyond Edlen’s control, including, but not limited to, losses due to utility company
failure, permanent power distribution failure, power failure caused by vandalism, faulty Exhibitor equipment or overloads caused by Exhibitor.
20.
It is agreed that in the event it becomes necessary to turn this matter over to an attorney for collection, or to file a lien, or foreclosure, or
otherwise, Exhibitor will pay Edlen its attorney fees or applicable agency fees.
21.
A service charge of 1.5% per month on any unpaid balances will be assessed starting 10 days after date of invoice. A $25.00 service charge will
be assessed for all returned checks and credit cards. Exhibitor agrees to reimburse Edlen for all applicable rental taxes.
22.
By signing this and/or the Method of Payment form, exhibitor hereby agrees to all terms and conditions on this order form.
COMMONLY ASKED QUESTION - WHERE WILL MY OUTLET BE LOCATED?
Outlets are located as depicted below for inline & peninsula booths. All other locations require labor on a time & material basis. Exhibitors with hard wall
booths must make arrangements with Edlen to bring power inside the booth on a time and material basis.
X
X
308
Aisle # ____
5 ft
4 ft
5A X
5A
4 ft
5A X
12 ft
4 ft
Aisle # 600
X
ISLAND BOOTHS
Aisle # 500
6 ft
EXAMPLE-FLOOR POWER
5 ft
4 ft
5A X
5A
4 ft
5A X
12 ft
Aisle # 900
302
A scaled floor plan must
accompany your order
with main power location,
add’l outlet locations &
booth orientation.
MAIN DROP
LOCATION
Aisle # 500
6 ft
Aisle # 900
203
(IN-LINE BTHS) (PENINSULA)
MAIN DISTRIBUTION
POINT
Aisle # ____
Aisle # ____
X
201
104
102
Aisle # ____
100
4 ft
Aisle # 600
EXAMPLE-CEILING POWER
(BACK TO BACK PENINSULAS)
FOR OTHER COMMONLY ASKED QUESTIONS VISIT OUR WEB SITE @ WWW.EDLEN.COM
OR CALL THE NUMBER ON THE FRONT OF THIS FORM.
ELECTRICAL LABOR FORM
Advance Payment Deadline Date: 4/9/14
COMPANY:
ELECTRICAL EXHIBITION SERVICES
701 Convention Plaza, St. Louis, MO 63101
Ph: (314) 342-5324 Fax: (314) 342-5384
[email protected]
BTH #
EVENT:
FIRST Championship 2014
FACILITY:
AMERICA’S CENTER
DATES:
April 23-26, 2014
EVENT# 044026SL
ELECTRICAL JURISDICTION
The work described below falls within the jurisdiction of the electrical union and cannot be performed by any other union, I&D house or
exhibitor. Please feel free to contact our office for clarification of scope of work.
ELECTRICAL LABOR IS REQUIRED FOR THE FOLLOWING WORK
1.
Electrical distribution under carpet
6.
Overhead power distribution
2.
Data/network cable under carpet
7.
Overhead coaxial (network) cable distribution
3.
Connection of all 208V or higher services
8.
Assembly & Installation of lighting hung from truss or ceiling
4.
Wiring of overhead signs
9.
Hardwiring of any electrical apparatus
5.
Installation of lighting requiring tools for installation
POWER DISTRIBUTION - PLEASE PROVIDE THE FOLLOWING INFORMATION
1. Floor Plan layout of your booth space
A. Floor plans must include exact outlet locations with dimensions or be to scale
B. Floor plans must reflect booth orientation. Please note surrounding booth or aisle numbers
C. Power comes from the floor. Identify a main power location we can deliver the power to. Power is distributed from that point.
Example: 20x30 Island Booth
Aisle 500
4’
5’
EXAMPLE ONLY
Main Distribution Point
Center of booth
X
1-5A
X
2-20A
EXAMPLE ONLY
Aisle 700
1-5A
X
5’
4’
2. Date you will begin building your booth _______________________________________ Estimated time _______________________
3. Show Site Contact with authority to make additions or changes to your order
Contact Name _____________________________________________________________
Contact Company __________________________________________________________
Contact Cell # ____________________________________________________________
4. Credit card information must be on file before any labor begins in your booth space. Please provide this information on your method
of payment form.
PLEASE USE THE BACK OF THIS FORM TO REQUEST ALL OTHER ELECTRICAL LABOR
ELECTRICAL LABOR FORM
Advance Payment Deadline Date: 4/9/14
COMPANY:
EXHIBITOR SERVICES
701 Convention Plaza, St. Louis, MO 63101
Ph: (314) 342-5324 Fax: (314) 342-5384
[email protected]
BTH #
EVENT:
FIRST Championship 2014
FACILITY:
AMERICA’S CENTER
DATES:
April 23-26, 2014
EVENT# 044026SL
ELECTRICAL LABOR/LIFT RATES & RULES
Please be advised that labor start times cannot be guaranteed. If no time is provided, work will be performed on a firstcome first-serve basis. A representative must come to Edlen’s Labor Desk prior to each individual labor call to confirm
that booth is ready for such labor. If labor is dispatched at the requested time and no “exhibitor supervisor” is available,
a minimum 1/2 hour labor charge per electrician will apply. A minimum labor charge of 1 hour will apply per man for
installation. Dismantle time will be calculated at 1/2 of the total installation time.
LABOR RATES
Straight time …………………………………………………………………………………… 81.00 per hour
Monday-Friday 8:00am - 4:30pm, excluding holidays
Overtime ………………………………………………………………………………………… 121.50 per hour
Monday-Friday 4:30pm-8:30pm, Saturdays 6:00am-11:59pm, excluding
holidays
Double time …………………………………………………………………………………...
162.00 per hour
Monday-Friday 8:30pm - 6:00am, , Sunday & Holidays
Lift charges will apply to for all overhead work such as; light installation overhead, power or data cable distribution
overhead, hanging signs, etc. Lift cost does not include operator.
LABOR REQUIRMENTS (Please complete all the sections below)
If you require any additional electrical work in your booth, please provide us with a production schedule with the dates,
times, number of men required and the type of work requested. This will assist us in accommodating your labor needs.
Example
Day
Monday
Date
1/5
# Men
4
Time
8:00 am
Work required Assemble & hang truss/lights
Day
Tuesday
Date
1/6
# Men
1
Time
12:30pm
Work required Wire electric sign
Day
Date
# Men
Time
Work required
Day
Date
# Men
Time
Work required
Day
Date
# Men
Time
Work required
Day
Date
# Men
Time
Work required
Day
Date
# Men
Time
Work required
Day
Date
# Men
Time
Work required
SHOW SITE SUPERVISOR
Contact Name:
Company:
Cell Number:
Email address:
PLEASE COMPLETE CREDIT CARD INFORMATION ON THE
FRONT OF THIS FORM OR THE METHOD OF PAYMENT FORM
Credit card information must be on file before any of the requested labor is performed.
UTILITY LAYOUT FORM
Advance Payment Deadline Date: 4/9/14
COMPANY:
ELECTRICAL EXHIBITION SERVICES
701 Convention Plaza, St. Louis, MO 63101
Ph: (314) 342-5324 Fax: (314) 342-5384
[email protected]
BTH #
EVENT:
FIRST Championship 2014
FACILITY:
AMERICA’S CENTER
DATES:
April 23-26, 2014
EVENT# 044026SL
Use the grid below to indicate the location of each utility outlet ordered. If power is only required at the
rear of an in-line booth this form is not necessary.
Indicate booth type: Island
□
Peninsula
□
Inline
□
Provide aisle or adjacent booth #’s for orientation
Power is brought to one location in island booths and then distributed from that point. Indicate this location and
all other outlet locations using the legend below:
X = Main Distribution Point
= 5amp/500watt
= 10amp/1000watt
= 15amp/1500watt
= 20amp/2000 watt
Indicate the layout scale and total square footage. Example: 1 Square = 1 Foot
_____Square = _____Ft
Total Square Footage = __________
Adjacent Booth or Aisle # _______________
Adjacent Booth or Aisle # _______________
Adjacent Booth or Aisle # _______________
Adjacent Booth or Aisle # _______________